Chess for blinds

  Introduction:

Chess history

IBCA

Our purpos

 Making and Procedure 

Procedure was done step by step which are as follow :

  first step : brainstorming

Scnd step: Identify the problem, when we identify the problem 

      Than we start the research,

Third step :         sketching

                     

 Forth step :Material

1: Red clay

2: White clay

3 : Plaster

Fifth step: molding casting

After doing above 4 steps it was the main step to select some important designs and textures which will be much easier for blinds to identify and then make their molds. Molds were made withPlaster of Paris and after their making finishing of the molds is much important to get the fine cast of the object.

                                     

After molding, casting was the important and it was done with the White Clay . It was difficult step to get the fine cast of the piece otherwise you have to do it again and again untill you dont get the fine cast.

After getting complete casting , finishing of the complete product is much needed nd it was done with sand paper or filer.


glazing : Last thing was Firing andGlazing in which cast of fine pieces were first fired inKiln and then required colours and glaze had to applied . After, it was agin fired for once to get the final product. 

                         Final product